BNC SERIES- Bayonet Neill–Concelman or British Naval Connector |
|
1. |
Developed according to the specification MIL-C-39012, with the Bayonet coupling mechanism, which have the advantages of quick mating, high reliability and used to connect RF coaxial cables in radio equipment and instruments. |
|
2. |
BNC type connectors are designed to accomodate a large variety of RG and industry standard cables |
|
3. |
It is specified in tow impedances, 50 and 75 ohms.
|
|
4. |
BNC 50 ohm connectors provide repeatable electronic performance from DC to 4 GHz.
|
|
5. |
BNC 75 ohm connectors are suitable for applications up to 1 GHz.
|
|
6. |
All 50 and 75 ohm connectors are intermatable.
|
|
|
Application
|
● Wireless Application
● Antennas
● Components
● Telecom
● Radio Boards
● Satcom
● GPS
|
● Instrumentation
● Broadband Communications
● Radios
● Base Stations
● PCMCIA Cards
|
|
|
|
|
|
● Technical Characteristics |
Electrical |
Impedance
|
50 ohm/ 75 ohm
|
Frequency Range
|
0 - 4 GHz/ 0 - 1 GHz
|
Working Voltage
|
500 VRMS max.
|
Dielectric Withstanding Voltage
|
1500VRMS
|
VSWR
|
Straight
|
1.3 max.
|
Right Angle
|
1.5 max.
|
Contact Resistance
|
Center Contact
|
3 Milliohm Max.
|
Outer Contact
|
2 Milliohm Max.
|
Insertion Loss
|
0.25dB + 0.1db @ 1 GHz
|
Insulator Resistance
|
5,000 Mega ohms min.
|
|
|
Material |
Part Name
|
Material
|
Surface Treatment
|
Body, Metal Parts
|
Brass or Zinc Alloy
|
Nickel Plating
|
Center Contacts
|
Plug: Brass
|
Gold Plating
|
Jack: Brass,Beryllium Copper, Phosphor Bronze
|
Gold Plating
|
Insulator
|
PTFE or Derlin
|
None
|
Crimp Ferrule
|
Annealed Copper
|
Nickel Plating
|
Clamp Gaskets
|
Silicone Rubber or Rubber
|
None
|
|
|
Mechanical |
Mating
|
Two Stud Bayonet Snap-on Coupling
|
Engagement Force
|
2.5 in-lbs. max. torque
|
Disengagement Force
|
3 lbs. max. axial force
|
Contact Retention
|
100 lbs. min.
|
Contact Captivation
|
6.1 lbs. min.
|
Durability (Mating)
|
500 cycles min. (For Be/Cu Jack Contact only)
|
|
|
Environmental |
Temperature Range
|
-65°C to 165°C / - 85℉ to 329℉
|
Vibration
|
MIL-STD-202 Method. 204/Test cond. B
|
Salt Spray
|
MIL-STD-202 Method 101/Test cond. B
|
Thermal Shock
|
MIL-STD-202 Method 107/Test cond. B
|
|
|
Note: These characteristics are typical but may not apply to all connectors. |