| TNC SERIES- Threaded Neill-Concelman Connector |
| |
| 1. |
TNC RF connectors are basically BNC connectors with threaded coupling and improved electrical performance at higher frequencies. |
| |
| 2. |
The TNC type connector is a weatherproof unit and with its threaded coupling ensures low noise and withstands shock and vibration. |
| |
| 3. |
TNC connectors are designed to accomodate cables from .150" to .250 OD.
|
| |
| 4. |
It is specified in tow impedances, 50 and 75 ohms.
|
| |
| 5. |
TNC 50 ohm connectors provide repeatable electronic performance from DC to 11 GHz.
|
| |
| 6. |
TNC 75 ohm connectors are suitable for applications up to 1 GHz.
|
| |
| 7. |
All 50 and 75 ohm connectors are intermatable.
|
| |
|
|
| |
|
| |
| ● Technical Characteristics |
| Electrical |
|
Frequency Range
|
0 - 11 GHz/ 0 - 1.0 GHz
|
|
Working Voltage
|
500 VRMS max.
|
|
Dielectric Withstanding Voltage
|
1500VRMS
|
|
VSWR
|
Straight
|
1.3 max.
|
|
Right Angle
|
1.5 max.
|
|
Contact Resistance
|
Center Contact
|
3 Milliohm Max.
|
|
Outer Contact
|
2 Milliohm Max.
|
|
Insertion Loss
|
1.3dB at 4 GHz (Straight)
1.5dB at 4 GHz (Right Angle)
|
|
Insulator Resistance
|
5,000 Mega ohms min.
|
|
| |
| Material |
|
Part Name
|
Material
|
Surface Treatment
|
|
Body, Metal Parts
|
Brass
|
Nickel Plating
|
|
Center Contacts
|
Plug: Brass
|
Gold Plating
|
|
Jack: Brass,Beryllium Copper, Phosphor Bronze
|
Gold Plating
|
|
Insulator
|
PTFE or Derlin
|
None
|
|
Crimp Ferrule
|
Annealed Copper
|
Nickel Plating
|
|
Clamp Gaskets
|
Silicone Rubber or Rubber
|
None
|
|
| |
| Mechanical |
|
Mating
|
7/16"-28 threaded coupling
|
|
Recommended Coupling Nut Torque
|
4.1 to 6.1 in.-lbs
|
|
Coupling Proof Torque
|
15 in-lbs.
|
|
Contact Retention
|
101.2 lbs. min.
|
|
Contact Captivation
|
6.1 in-lbs. min.
|
|
Durability (Mating)
|
500 cycles mating & unmating cyles @12 cycles per min. (For Be/Cu Jack Contact only)
|
|
| |
| Environmental |
|
Temperature Range
|
-65°C to 165°C / - 85℉ to 329℉
|
|
Vibration
|
MIL-STD-202 Method 204/Test Cond. B
|
|
Salt Spray
|
MIL-STD-202 Method 101/Tes Cond. B
|
|
Thermal Shock
|
MIL-STD-202 Method 107/Test Cond. B
|
|
| |
Note: These characteristics are typical but may not apply to all connectors. |
